Shock accelerated cylindrical gas inhomogeneities. Part 2 - A heavy gas cylinder

Experiments have been carried out in which a cylindrical volume of a heavy gas is impulsively accelerated by a weak shock wave. A laminar jet of sulphur hexafluoride (SF_6) is used to produce the heavy gas cylinder. Planar laser induced fluorescence (PLIF) is used to visualize the flow. In viewing the PLIF images it is discovered that the vorticity that early on resides on the boundary between the two gasses, separates from the cylinder to form a pair of vortices. Subsequently these vortices wrap the heavy gas around them. This process is quite different from what is observed when the cylinder is lighter than its surroundings. Similar experiments with helium (part 1 of this series) showed that a small amount light gas stays with the vorticity, eventually becoming part of the vortex cores. A simple model capable of explaining these differences is presented. In addition, the displacement of the jet cross section is measured and agrees reasonably well with previous experimental and computational results

Biocontamination and particulate detection system

A method for determining the characteristics and amount of microscopic contaminants lodged on a photographed surface is disclosed. An image enhanced full color photographic negative and print are taken of the contaminated surface. Three black and white prints are developed subsequently from red, green and blue separation filter overlays of the color negative. Both the color and three monochromatic prints are then scanned to extract in digital form a profile of any contaminant possibly existing on the surface. The resulting profiles are electronically analyzed and compared with data already stored relating to known contaminants

The mechanism of stress-corrosion cracking in 7075 aluminum alloy

Various aspects of stress-corrosion cracking in 7075 aluminum alloy are discussed. A model is proposed in which the continuous anodic path along which the metal is preferentially attacked consists of two phases which alternate as anodes

Shock-induced mixing of a light-gas cylinder

Experiments have been carried out to quantify the mixing induced by the interaction of a weak shock wave with a cylindrical volume of a gas (helium) that is lighter than its surroundings (air). In these experiments a round laminar jet was used to produce the light-gas cylinder, and planar laser-induced fluorescence (PLIF), utilizing a fluorescent tracer (biacetyl) mixed with the helium, was used to visualize the flow. These techniques provide a higher quality of flow visualization than that obtained in previous investigations. In addition, the PLIF technique could be used for the measurement of species concentration. The distortion of the helium cylinder produced by the passing shock wave was found to be similar to that displayed by images from previous experimental and computational investigations. The downstream displacement of several points on the boundary of the light-gas cylinder are measured and agree reasonably well with the results of earlier experimental and theoretical studies as well. Because the mixing process causes the helium originally contained within the cylinder to be dispersed into the surrounding air, the PLIF image area inside the contour at one half the maximum concentration of the fluorescent tracer decreases as the two gases mixed. The change in this area is used as a measure of the mixing rate, and it is found that the time rate of change of this area divided by the area of the initial jet is approximately - 0.7 X 10^3 S^(-1)

Treatment increases stress-corrosion resistance of aluminum alloys

Overaging during heat treatment of the aluminum alloys immediately followed by moderate plastic deformation, preferably by shock loading achieves near optimum values of both yield strength and resistance to stress corrosion. Similar results may be obtained by substituting a conventional deformation process for the shock loading step

Rapid purification of quantum systems by measuring in a feedback-controlled unbiased basis

Rapid-purification by feedback --- specifically, reducing the mean impurity faster than by measurement alone --- can be achieved by making the eigenbasis of the density matrix to be unbiased relative to the measurement basis. Here we further examine the protocol introduced by Combes and Jacobs [Phys.Rev.Lett. {\bf 96}, 010504 (2006)] involving continuous measurement of the observable $J_z$ for a $D$-dimensional system. We rigorously re-derive the lower bound $(2/3)(D+1)$ on the achievable speed-up factor, and also an upper bound, namely $D^2/2$, for all feedback protocols that use measurements in unbiased bases. Finally we extend our results to $n$ independent measurements on a register of $n$ qubits, and derive an upper bound on the achievable speed-up factor that scales linearly with $n$.Comment: v2: published versio

Trends in wages, underemployment, and mobility among part-time workers

This study examines three trends in the labor market experiences of part-time workers: (1) trends in real earnings; (2) trends in the extent of involuntary part-time work (underemployment); and (3) trends in the rate of exit from part-time work. Data are from Current Populating Surveys from the 1970s and 1980s. It considers whether observed changes in the position of part-time workers are due to changes in the attributes of part-time workers, the occupational and industrial location of part-time jobs, the process of selectivity into part-time employment, or changes in the returns to these factors. The questions addressed in this study have significant implications for research on poverty because, unless supplemented by other family earners, the low earnings levels of part-time job holders make them vulnerable to poverty and dependency.

Acoustic emission from a growing crack

An analytical method is being developed to determine the signature of an acoustic emission waveform from a growing crack and the results of this analysis are compared to experimentally obtained values. Within the assumptions of linear elastic fracture mechanics, a two dimensional model is developed to examine a semi-infinite crack that, after propagating with a constant velocity, suddenly stops. The analytical model employs an integral equation method for the analysis of problems of dynamic fracture mechanics. The experimental procedure uses an interferometric apparatus that makes very localized absolute measurements with very high fidelity and without acoustically loading the specimen

Narrow band optical heterodyne detection

Narrowband optical heterodyne detectio